4.47 t h Dried Material Moisture 15% Rotary Wood Chip Dryers

Product Description

Dried Material Moisture 15% Rotary Wood Chips Drying Machine

Rotary wood chips drying machine is made up of cylinder, lifting plate, transmission, supporting devices, and others. Based on reasonable layout an alternate angle-change equally spaced in cylinder, the lifting plate scatters the wet material inside rotating cylinder. Hot air flow turns water into steam letting into air, and aimed dry material is achieved.

Rotary wood chips drying machine is indispensable auxiliary facilities in the wood processing industry, match crusher, briquette granulating machine, charcoal machine equipment. The dryer can according to the different process requirements in terms of form a complete set. The moisture of feed materials is below 50%, and after drying the material the moisture will below 15%.

Rotary wood chips drying machine parameter

Working principle of rotary wood chips drying machine

Wet materials are sent to hopper by belt conveyor or bucket elevator, and then by hopper feeder the material enters the feeding end through the feeding tube, next the material flows into the dryer smoothly. The material is added from the higher end, the heat carrier is entered at the low end with the material in reverse contact. With the rotation of the cylinder the material is operated by gravity to the lower end. In the process of moving forward, the wet materials can be directly or indirectly heated by the heat carriers, so that the wet materials can be dried and then be sent out by belt conveyor or spiral conveyor to the discharge end.

Rotary wood chips drying machine characteristics

1. The distribution and Angle design of lifting blade is reasonable and the performance is reliable. Therefore, the thermal efficiency is high and the drying is uniform.
2. The rotary wood chips drying machine adopts the structure of the adjustable tug, then the tugboat and the rolling circle cooperate well, which greatly reduces wear and power consumption.
3. The specially designed retaining wheel structure greatly reduces the horizontal thrust caused by the tilt of the equipment. The anti-overload ability is strong, the cylinder body runs smoothly.
4. The drying machine has the characteristics of high temperature resistance and can use high temperature and hot air to dry material quickly.
5. The rotary wood chips drying machine has high production capacity, low fuel consumption and low drying cost.