Drum wood chipper machine is one kind of special equipment for producing wood chips, which is widely used in the raw material preparing process in the factories of flakeboard, fiberboard, papermaking and wood chips making plant, small drum wood chipping machine is the best equipment to preparing material.
After the raw materials are chipped into pieces, they become small wood chips of a certain specification, and they can be used as raw materials for particleboard, medium density board, fiberboard, etc., and can also be used as fuel. drum wood chipping machine has features of wide application range, diversified raw materials, good quality wood chips, safe and reliable, and simple and convenient operation, high production efficiency.
This drum wood chipping machine is used for crushing small diameter wood, timber cutting, processing residues(such as branches, boards, slats, roundwood cores, waste boards, scrap wood, waste pallet, bamboo shelves, brackets, wood bark pieces, etc) ,and can also be used to cut non-wood raw materials (such as sugar cane, reeds, bamboo, etc.).
The whole wood chipper machine takes one linkage control to conveying, feeding, clamp and chipping.
Working Principle of drum wood chipper machine
drum wood chipper machine is made up of feed inlet, upper cover, rotor, hammers, pin roll, outlet, motor, base, fan blower and cyclone etc.
Materials fall into the crushing room through feed inlet. There are crushed under the action of high speed rotating hammer blowing and screener friction, go through the screener hole and discharge from the outlet under the action of centrifugal force and flow.
Drum wood chipper machine performance characteristics
- chipper alloy tool is wear-resistant sharp, reliable and advanced, improve service life
——The unique smashing system design greatly improves the service life of the equipment. The crushing chamber adopts multi-stage crushing process and fine crushing principle device, which is characterized by large working impact, high production efficiency, and strong crushing ability.
- the consumption of wearing parts of the drum wood chipping machine is low and the operating cost is low
—The structure is reasonable, the principle and technology of crushing are advanced, the operation is reliable, and the running cost is low; all parts of the crusher are wear-resistant and protected, the maintenance cost is reduced to the minimum, and the general service life can be increased by more than 30%.
- The main body of the dust remover and the drum wood chipper is a box body, and the lower part of the box body is provided with a ash door, and the box body is installed in a vertical frame. The vertical frame body is covered with filter bags, and the dust collector receives dust gas from the centrifugal separator. Filter bag dust collector dust removal efficiency up to 97%.
Drum wood chipper machine parameter
|Totol power||93 kw||125 kw|
|Feeding port size||270×500 mm||300×680 mm|
|Voltage||380V 50HZ 3Phase||380V 50HZ 3Phase|